POP UP TABLE LIGHT SETUP INSTRUCTIONS FOR SHOW OFF LIGHTING
READ BEFORE USING
PLEASE WATCH INSTALL VIDEO UNDER THE VIDEOS TAB TO SEE HOW EASY IT IS TO SETUP OUR POP UP TABLE LIGHTS
Step #1
Rest the base plate on the top edge of the table. Align the base plate straight with the table edge.

Step #2
Place the top jaw of the clamp on the "center" of the base plate, directly in front of the pole.

Step #3
Squeeze the bottom jaw of the clamp tight against the bottom of the table, while holding it with your left hand. With your right hand turn the twist handle of the clamp counter clockwise until tight.
CAUTION: DO NOT OVER TIGHTEN OR RISK DAMAGE TO CLAMP OR TABLE.
Step #4
Slide - DO NOT TWIST OR FORCE - the neck of the fixture on to the telescopic pole.

Step #5
Hold one hand under COB LED bulb and screw it into the E27 socket, rotating counter clockwise until lighting snug.
CAUTION: DO NOT OVER TIGHTEN OR YOU MAY DAMAGE THE E27 SCOKET AND OR THE BASE OF THE BULB.
Step #6
Attach extention cord to the light and it will come on .
Step #7
Open top latch on the telescopic pole and fully extend. Close the latch to lock in place.
CAUTION: FAILURE TO CLOSE LATCHES TO LOCK IN PLACE WILL CAUSE DAMAGE TO LIGHTING UNIT.
Open second latch on the telescopic pole and fully extend. Close to lock in place. Open third latch on the telescopic pole and fully extend. Close to lock in place.
General Information
COMPONENTS
-
Aluminum telescopic poles
-
Chrome moli steel base plates
-
Steel quick clamp
-
High power COB LED bulbs
-
NO TRANSFORMERS
BULBS
You can safely use almost any E27 base bulbs from 25W up to 150W each socket. DO NOT EXCEED 200W MAXIMUM.
BULB WARRANTY
Show Off Lighting Pop Up lights come with a (1) year warranty on each COB LED bulb unless damage is caused by abuse, improper use, incorrect installation, or acts of God. Replacement bulbs will always be available from Show Off Lighting for a reasonable price.
LED LIGHT BAR & POP UP LIGHT WARRANTY (EXCLUDING BULBS)
Show Off Lighting is guaranteed for (1) year from any defects not caused by abuse, improper use, incorrect installation, or acts of God. If there is a defect we will fix it at no charge. Simply return the light to our Denver, North Carolina facility. Accidental damage can be repaired quickly and easily by contacting us. Warranty excludes bulbs.
PLEASE WATCH THE INFORMATIONAL VIDEOS ABOUT THE TABLE AND FLOOR STAND INSTALLATION BY CLICKING ON THE VIDEOS TAB ON THE MENU.